Marana Artificial Turf Pros logoMarana Artificial Turf ProsMarana, AZ
Xeriscape + Turf Combo Design photo

Marana Artificial Turf Pros

Xeriscape + Turf Combo Design in Marana, AZ

Xeriscape and turf combo yard design in Marana, AZ — blended turf zones with rock and native plants. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Marana and nearby communities.

Not every yard needs wall-to-wall turf. Marana Artificial Turf Pros designs blended layouts that put turf where people actually walk and play, then use decomposed granite and drought-tolerant plants for the rest of the yard, cutting water use without giving up a usable lawn space.

This approach works especially well on larger Marana lots where a full turf conversion would run up the budget for square footage that rarely gets used anyway.

What's included

What's included

  • Typically included — layout planning, turf zone install, decomposed granite or rock borders, edge transitions between materials
  • Optional — drought-tolerant plant placement, mulch ground cover, permeable paver accents
  • Customer prep — flag any existing sprinkler zones or buried lines you know about

How it works

How our Xeriscape + Turf Combo Design process works

  1. Landscape concept design photo
    Step 1

    Landscape concept design

    A combined plan balances turf areas with drought-tolerant plantings and hardscape.

  2. Zone mapping photo
    Step 2

    Zone mapping

    Different landscape zones are mapped out for turf, rock, and plant placement.

  3. Soil and rock prep photo
    Step 3

    Soil and rock prep

    Soil is prepared differently for turf zones versus xeriscape planting beds.

  4. Turf section installation photo
    Step 4

    Turf section installation

    Turf is installed in designated zones according to the overall design plan.

  5. Plant bed integration photo
    Step 5

    Plant bed integration

    Drought-tolerant plants and rock features are added to complement turf areas.

  6. Design finishing touches photo
    Step 6

    Design finishing touches

    Borders and transitions are refined for a cohesive landscape appearance.

Materials

Materials and methods for Xeriscape + Turf Combo Design

A combo yard pairs two or three material types, so each zone needs its own prep and edging to keep them from migrating into each other over time.

  • Mixed-zone turf fibers photo

    Mixed-zone turf fibers

    Turf suited for partial-shade and open-sun zones within a combined Marana yard design.

  • Decorative rock borders photo

    Decorative rock borders

    Rock materials define clean boundaries between turf and planting areas instead of a soft, shifting edge.

  • Drought-tolerant plant stock photo

    Drought-tolerant plant stock

    Low-water plants are selected to complement turf sections and handle Marana's long dry stretches.

  • Permeable paver accents photo

    Permeable paver accents

    Pavers allow water flow while adding design contrast between turf and hardscape zones.

  • Mulch ground cover photo

    Mulch ground cover

    Mulch reduces water evaporation in planted areas sitting next to turf.

  • Edge transition strips photo

    Edge transition strips

    Strips create clean separation so rock doesn't migrate into turf or vice versa.

Timeline

How long does a Xeriscape + Turf Combo Design take?

A combo design runs a bit longer than a single-surface turf job since multiple material zones are built out separately.

  1. 01

    Design and zone mapping

    2–3 days
  2. 02

    Turf zone install

    1–2 days
  3. 03

    Rock, plant, and edging finish

    1–2 days

Need a schedule that fits?

Get a Free Estimate

Cost

What does a Xeriscape + Turf Combo Design cost in Marana?

Combo yards often come in lower than full turf conversions since rock and planted zones cost less per square foot than turf. Ask for a free estimate to see how a combo layout compares to full turf for your yard.

Project typeTypical rangeWhat’s included
Small accent combo$2,000–$5,000,turf walkway or patio zone with rock border.
Standard backyard combo$5,000–$12,000,multiple turf and rock zones with basic plantings.
Full-property combo design$12,000–$25,000,front and backyard zones with plant integration.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Codes & permits

Permits and codes for Xeriscape + Turf Combo Design

Check with Pima County or Marana's planning office, and your HOA if applicable, before major grading changes.

Typically needs a permitOften no permit
Grading changes that redirect significant drainage flowStandard residential turf and rock zone combinations
Retaining wall or major hardscape structures added as part of the designPlant bed additions without structural changes

DIY vs pro

DIY vs hiring a pro for Xeriscape + Turf Combo Design

DIYHire a pro
Workable for a single small rock border or planting bedZone planning that accounts for drainage between turf and rock areas
Home centers sell basic edging material for simple zone separationEdging installed to actually hold the line between materials long-term
Risk of rock migrating into turf without properly installed edgingDesign cohesion across multiple zones instead of a patchwork look

When to call

When to call for Xeriscape + Turf Combo Design

Call Marana Artificial Turf Pros for a free design consultation.

  • You want to cut water use but don't want an all-turf or all-gravel yard
  • Your current yard has one struggling patch of grass surrounded by dead space
  • You're planning a front yard refresh that still needs to look intentional

FAQs

Xeriscape + Turf Combo Design FAQs

Is a combo design cheaper than full turf?

Usually, yes. Rock and planted zones generally cost less per square foot than turf, so a combo layout can lower the total project cost while still giving you a usable lawn area.

What is the best artificial grass for hot climates?

Fiber blends with UV-stabilized backing and a heat-reflective infill hold up best under Marana's sun, whether used in a full-turf yard or as part of a combo design.

How do I decide how much of my yard should be turf versus rock?

It usually comes down to where people actually walk, sit, or let pets out. We map that during the design phase so turf goes where it gets used.

Will the rock and turf zones stay separated over time?

With proper edging between zones, yes. Skipping that step is the most common reason rock ends up scattered into turf after a year or two.

Can I convert a dead lawn into a combo design instead of full turf?

That's one of the most common combo requests. Dead grass areas get removed and replaced with a mix of turf and xeriscape zones based on how the space is used.

Next step

Get a Xeriscape + Turf Combo Design estimate in Marana

Ready to cut water use without losing your usable yard space? Call Marana Artificial Turf Pros at (928) 384-3678 for a free estimate.

Ask about Xeriscape + Turf Combo Design

Tell us about the project and how to reach you.

Call (928) 384-3678